Pioneer AVH-1480DVD, Owner'S Manual

Page: 162 / 188

Connecting the power cord
Note:
Depending on the kind of vehicle,
the function of 2* and 4* may be
different. In this case, be sure to
connect 1* to 4* and 3* to 2*.
1*
3*
2*
4*
Yellow (1*)
Connect to the constant
12 V supply terminal.
Red (3*)
Connect to terminal
controlled by ignition
switch (12 V DC).
Yellow (2*)
Back-up
(or accessory)
Red (4*)
Accessory
(or back-up)
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
When you connect the separately sold
multi-channel processor (DEQ-P7650) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).
Connect leads of
the same color to
each other.
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case, be
sure to connect to both connectors.
Fuse (10 A)
This product
Antenna input
RGB input
Navigation system
(AVIC-F220 (sold
separately)).
26 pin cable (Supplied with Navigation unit)
Insert the 26 pin cable in the direction
indicated in the figure.
Please contact your dealer to inquire
about the connectable navigation unit.
En
62
Section
12
Installation