Pioneer AVH-1480DVD, Owner'S Manual

Page: 148 / 188

4 Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
#
When no subwoofer is connected to the rear
output, select
Full
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select Subwoofer (subwoofer).
Notes
!
Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to
Using subwoofer output on
page 42).
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
!
Mute – Muting
!
ATT – 20dB – Attenuation ( ATT – 20dB has a
stronger effect than
ATT
–
10dB
)
!
ATT
–
10dB – Attenuation
!
Off – Turns the sound muting/attenuation
off
Notes
!
When
Mute
is displayed, the sound is turned
off and no audio adjustments can be made.
!
When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
!
Operation returns to normal when the phone
connection is ended.
Selecting the system language
The system language can be selected from
nine languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language, they can also be displayed
on this unit.
!
The language can be changed for the fol-
lowing:
— System menu
— Video Setup
— On-screen display
— Multi language setting for DivX
— Language for cautions
Some operations on this unit are prohib-
ited from use while driving or require
careful attention when operated. In
such cases, a caution will appear on the
display. You can change the language
for caution messages with this setting.
!
If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
!
Some characters may not be displayed
properly.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
English
(English) —
Français
(French) —
Deutsch (German)
—
Español (Spanish)
— Русский (Russian) — Português (Portu-
guese) —
ﺍﻟ ﻌ ﺮ ﺑ ﻴ ﺔ
(Arabic) — (Persian)
— (Hebrew)
En
48
Section
10
Menu operations