Pioneer AVH-1400DVD, Installation Manual

Page: 4 / 76

Connecting the power cord
Speaker leads
White: Front
left

White/black: Front left

Gray: Front right

Gray/black: Front right

Green: Rear left

or subwoofer

Green/black: Rear left

or subwoofer

Violet: Rear right

or subwoofer

Violet/black: Rear right

or subwoofer

ISO connector
Note:
In some vehicles, the ISO connector may be divided into
two. In this case, be sure to connect to both connectors.
Note:
Depending on the kind of vehicle,
the function of 2* and 4* may be
different. In this case, be sure to
connect 1* to 4* and 3* to 2*.
1*
3*
2*
4*
Yellow (2*)
Back-up
(or accessory) Yellow (1*)
Connect to the constant 12 V
supply terminal.
Connect leads of the same
color to each other.
Red (4*)
Accessory
(or back-up) Red (3*)
Connect to terminal controlled by
ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
This product
Antenna input
Orange/white
Connect to lighting switch terminal.
4 m
Fuse (10 A)
RGB input
Navigation system
(AVIC-F220 (sold
separately))
Please contact your dealer to
inquire about the connectable
navigation unit.
Insert the 26 pin cable in the direction
indicated in the figure.
26 pin cable (Supplied with navigation unit)
AUX jack (3.5 ø) (AVH-4400BT/AVH-3400DVD only)
Use a mini plug cable to connect with
auxiliary device.
En
4
Section
01
Connecting the units