background image

 

Other connections

10

 

56

 

En

 

iPod playback

 

To navigate songs on your iPod, you can take 
advantage of the OSD of your TV connected to 
this receiver.

 

1

 

 You can also control all 

operations for music in the front panel display 
of this receiver.

 

Finding what you want to play

 

When your iPod is connected to this receiver, 
you can browse songs stored on your iPod by 
playlist, artist, album name, song name, genre 
or composer, similar to using your iPod 
directly.

 

1

Use the 

 

/

 

 buttons to select a category 

then press 

 

ENTER

 

 to browse that category.

 

• To return to the previous level any time, 

press 

 

RETURN

 

.

 

2

Use the 

 

/

 

 buttons to browse the 

selected category (e.g., albums).

 

• Use 

 

/

 

 to move to previous/next levels.

 

3

Continue browsing until you arrive at 

what you want to play, then press 

 

 

 to start 

playback.

 

2

 

Navigation through categories on your iPod 
looks like this:

 

Playlists 

 

 

 Songs

Artists 

 

 

 Albums 

 

 

 Songs

Albums 

 

 

 Songs

Songs
Podcasts
Genres 

 

 

 Artists 

 

 

 Albums 

 

 

 Songs

Composers 

 

 

 Albums 

 

 

 Songs

Audiobooks
Shuffle Songs

 

 Tip

 

• You can play all of the songs in a particular 

category by selecting the 

 

All

 

 item at the top 

of each category list. For example, you can 
play all the songs by a particular artist.

 

Basic playback controls

 

The following table shows the basic playback 
controls for your iPod:

Note

 

1 • Note that non-roman characters in the title are displayed as 

 

#

 

.

• This feature is not available for photos or video clips on your iPod.

2 If you’re in the song category, you can also press 

 

ENTER

 

 to start playback.

iPod Top

  [ 

Playlists

 

 ]

  [ Artists 

 ]

  [ Albums 

 ]

  [ Songs 

 ]

  [ Podcasts 

 ] 

  [ Genres  

  [ Composers 

 ]

  [ Audiobooks 

 ]

  [ Shuffle  Songs 

 ]

E n t e r

 

Button

What it does

 

 

Press to start playback.

 

If you start playback when something 
other than a song is selected, all the 
songs that fall into that categor y will play.

 

 

Pauses playback, or restarts playback 
when paused.

 

 /

 

Press and hold during playback to start 
scanning.

 

/

 

Press to skip to previous/next track.

Press repeatedly to switch between 

 

Repeat One

 

 

Repeat All

 

 and 

 

Repeat 

Off

 

.

Press repeatedly to switch between 

 

Shuffle Songs

 

 

Shuffle Albums

 

 and 

 

Shuffle Off

 

.

 

TUNER DISP
(SHIFT+

)

 

Press repeatedly to change the song 
playback information displayed in the 
front panel display.

 

 

/

 

 

When browsing, press to move to 
previous/next levels.

 

/

 

During Audiobook playback, press to 
switch the playback speed: Faster 

 

 

 

Normal 

 

 Slower

TOP MENU

Press to return to the 

iPod Top

 menu 

screen.

RETURN

Press to return to the previous level.

VSX_918_818_KU.book 56 ページ 2008年5月15日 木曜日 午後6時46分

Summary of Contents for 918V-K - AV Receiver - Gloss













































































Reviews: