Listening to your system
05
32
En
Using Front Stage Surround
Advance
The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.
•
While listening to a source, press
STEREO/
A.L.C.
to select Front Stage Surround Advance
modes.
•
STEREO
– See
Listening in stereo
on
page 31 for more on this.
•
A.L.C.
– See
Listening in stereo
on page 31
for more on this.
•
F.S.S.FOCUS
– Use to provide a rich
surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.
•
F.S.S. WIDE
– Use to provide a surround
sound effect to a wider area than
FOCUS
mode.
1
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
•
While listening to a source, press
AUTO/
DIRECT
to select Stream Direct mode.
•
AUTOSURR.
– See
Auto playback
on
page 30.
•
DIRECT
– Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono
settings. You will hear sources according
to the number of channels in the signal.
For analog sources, only Channel Level can
be set. All other digital processing can not
be set.
Using the Sound Retriever
When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
2
•
Press
SOUND RETRIEVER to switch the
sound retriever on or off.
Note
1 When using
F.S.S. WIDE
, a better effect can be obtained if Auto MCACC Setup is performed. For more on this, refer to
Automatically setting up for surround sound (MCACC)
on page 8.
AUTO/DIRECT
PHASE
ADV SURR
SOUND
RETRIEVER
STEREO/
A.L.C.
ACOUSTIC
EQ
STANDARD
DIALOG
Front left
speaker
Front right
speaker
FOCUS
position (Recommend)
Front left
speaker
Front right
speaker
WIDE
position
2 The Sound Retriever is only applicable to 2-channel sources.
AUTO/DIRECT
PHASE
ADV SURR
SOUND
RETRIEVER
STEREO/
A.L.C.
ACOUSTIC
EQ
STANDARD
DIALOG
AUTO/DIRECT
PHASE
ADV SURR
SOUND
RETRIEVER
STEREO/
A.L.C.
ACOUSTIC
EQ
STANDARD
DIALOG
VSX_918_818_KU.book 32 ページ ２００８年５月１５日 木曜日 午後６時４６分
