8
En
Part Names and Functions
English
Part Names and Functions
30°
30°
If you are having difficulty with operation of
the remote control unit
¶
The remote control unit may not operate if there are
objects placed between it and the display.
¶
Operational distance will gradually become shorter as the
batteries begin to wear out, replace weak batteries with
new ones as soon as possible.
¶
This unit discharges infrared rays from the screen. Placing a
video deck or other component that is operated by an
infrared remote control unit near this unit may hamper that
component’s reception of the remote control’s signal, or
prevent it from receiving the signal entirely. Should this
occur, move the component to a position further away from
this unit.
¶
Depending on the installation surroundings, this unit’s
remote control unit may be influenced by the infrared rays
discharged from the Plasma Display, hampering reception
of its rays or limiting its operational distance. The strength
of infrared rays discharged from the screen will differ
according to the picture displayed.
Operating range of the remote
control unit
When operating the remote control unit, point it at the
remote sensor located on the front panel of the main
unit. The remote control unit is operable up to 7 m from
the unit and within a 30 angle on each side of the
sensor.
Inserting the batteries in the
remote control unit
Designated batteries
Please use size AA (R6) or AA (LR6).
CAUTION
¶
Do not use batteries other than those designated, and do
not mix old and new batteries together, since rupture or
leakage may result, leading to danger of fire, personal
injury, or contamination.
¶
When loading batteries into the remote control unit, insert
the batteries with (+) and (–) polarities matching those
indicated in the diagram. Inserting batteries incorrectly
may result in battery rupture or leakage, leading to danger
of fire, personal injury, or contamination.
¶
Do not heat or disassemble batteries, and do not dispose
of batteries in fire or water, since battery rupture or leakage
may result, leading to danger of fire or personal injury.
¶
When not using the remote control unit for extended
periods of time, remove the batteries and store them
separately. Leaving batteries unused in the unit may
result in battery leakage, leading to danger of fire,
personal injury, or contamination.
When disposing of used batteries, please comply
with governmental regulations or
environmental public institution’s rules that
apply in your country/area.
D3-4-2-3-1_En
While pressing down lightly, slide
in the direction of the arrow.
Two AA (R6)
batteries
7 m
(23 feet)
Remote Sensor
Summary of Contents for 507CMX - PDP - 50" Plasma Panel
Page 151: ...43 Ja そ の 他 日 本 語 ...
