Thank you for purchasing this Pioneer quality product.
Prior to Installation
Observe all local plumbing and building codes before you begin
•
installation.
Carefully shut off both hot and cold water supplies from under the sink.
•
Plug the sink drain with a soft cloth to prevent intrusion of debris or the
•
loss of any faucet parts.
For replacement installations, carefully remove the existing
•
faucet and clean the entire surface of the sink mounting holes.
Pioneer reserves the right to make changes in the design of faucets without
•
notice as specified in the pricebook.
2
Faucet Installation
Clean lavatory surface (A) from oil, grease or debris.
•
Apply adequate amount of plumbers putty or sealant underneath of base
•
plate.
Lead the faucet shank (B) through faucet holes.
•
Slide the mounting washers (C) through faucet shank (B).
•
Thread and hand tighten the mounting nut (D) through faucet shank (B). Make
•
sure both side of mounting nuts (D) are securely tighten.
3
