Maintenance of the Machine
WARNING:
Maintenance must be done by
authorized personnel only.
Clean your machine frequently. It will have longer life
and need fewer repairs.
Lubrication
The Polisher is completely lubricated. The bearings
and gears in the gear unit have enough lubricant for two
or three years of normal operation. All other bearings
are sealed and have enough lubricant for the life of the
machine.
Motors and Gears
Remove or blow dust and dirt from the motor frequently.
Repairs
If repairs to the gear unit or motor are needed, do not
disassemble the gears and motor! Return the machine
to the nearest Amano Pioneer Eclipse Distributor or
Amano Pioneer Eclipse Authorized Service Center.
Maintenance Inspection
Return the machine to a Amano Pioneer Eclipse
Authorized Service location every 12 months for
maintenance inspections.
Handle Lock Lever
The locking mechanism for the handle can become
loose. Tighten the nut on the end of the cross link bolt.
The pressure of the locking lever is correct when the
handle can be adjusted easily and fastened as needed.
Maintenance of Brushes
Always remove the brush from the machine when not
in use. Keep brushes in a cool, dry location. Heat
can damage the wood and the bristles. Scrub brushes
with bassine fibers must be put in water for 16 hours to
replace moisture and give the bristles a longer life.
WARNING:
Maintenance must be done by
authorized personnel only.
WARNING:
Disconnect the electrical plug from
the electrical outlet before doing any repairs or
maintenance to the machine.
Clean your machine frequently. It will have longer life
and need fewer repairs. Replace damaged or worn
parts with the correct Amano Pioneer Eclipse parts.
CAUTION:
Keep all fasteners tight. Keep all
adjustments according to specifications.
Switches
WARNING:
All electrical repairs must be done by
authorized personnel only. The machine must be
tested after electrical repairs are made to make sure
it is safe to operate. Disconnect the electrical plug
from the outlet before doing any electrical repairs to
this machine.
The start and stop switches are in the handle. If any
part of the switch is not operating, replace the part.
If any part of the electrical system of the machine is
not operating or is damaged, replace the part. Make
sure all connections are tight. Return the machine to
a Amano Pioneer Eclipse Service Branch or a Amano
Pioneer Eclipse Authorized Service Center for electrical
repairs and testing.
9
English - EN
Section - A
Summary of Contents for FM 1700
