PIONEER DJ SERATO DDJ-REV7 Instruction Manual Download

Page: 105 / 118

105

Using other types of DJ software (via
MIDI)

If you connect a PC/Mac with MIDI software installed, to the unit via a USB cable, you can
control the DJ software via the unit.

•

To play tracks stored on a PC (Windows) with the unit, install the dedicated audio driver
software (page 21).

•

For details on the unit’s MIDI messages, visit the URL below.

pioneerdj.com/support/

•

Install DJ software and configure the audio and MIDI settings on a PC/Mac beforehand.

•

You can set MIDI mode of this unit in [

MIDI MODE

] in the Utility settings (page 101).

•

You can’t use some buttons on the unit for controlling DJ software depending on the DJ
software you use.

Summary of Contents for SERATO DDJ-REV7























































































































Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Related manuals for SERATO DDJ-REV7

Brands by name

Popular brands

PIONEER DJ SERATO DDJ-REV7, Instruction Manual

Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Related manuals for SERATO DDJ-REV7

Brands by name

Popular brands