101
Settings
Auto standby
When [
AUTO STANDBY
] is set to [
ON
], the unit enters standby mode after 4 hours without
being used (no audio signal (more than -24 dB) is input to the unit).
Press the [
SLIP
] button on the left deck to exit standby mode.
•
The factory setting is [
ON
].
•
Set [
AUTO STANDBY
] to [
OFF
] if you don’t need to use the auto standby function.
SLIP LIT TYPE
Sets whether to light up or blink the [
SLIP
] button.
•
Setting values:
LIT
*,
BLINK
•
[LIT]
: Lights up the [
SLIP
] button when Slip is
turned on, and blinks it during slip playback.
•
[BLINK]
: Blinks the [
SLIP
] button when Slip is
turned on.
MIDI MODE
Sets the unit's MIDI mode.
•
Setting values:
AUTO
*,
GENERAL
•
[AUTO]
: Works in the most suitable controller
mode for Serato DJ Pro when the software is
running, and works as a general MIDI controller
when Serato DJ Pro isn’t running.
•
[GENERAL]
: Works as a general MIDI
controller whether Serato DJ Pro is running or
not.
•
To select [
GENERAL
], close Serato DJ Pro.
FACTORY RESET
Restores the factory settings.
•
Setting values:
cancel
*,
reset
Setting item
Description
