En
9
Part
names
and
functions
Part names and functions
Top panel
1
2
3
45
6
c
d
e
f
g
h
i
j
a 9
7
b
8
1
POWER switch
When turning the switch to the [
ON
] side, the power is turned on and
the strobe illuminator on the side lights.
=
Turning the power on
(p. 15 )
Turning the power off
(p. 15 )
2
START/STOP button
Pressing the button starts or stops rotation of the turntable.
=
Playback
(p. 15 )
3
Speed change button
Changes the speed according to the record to be played.
!
For a 33 1/3 rpm record, press the [
33
] button.
!
For a 45 rpm record, press the [
45
] button.
!
For a 78 rpm record, press the [
33
] button and [
45
] button at the
same time.
=
Playback
(p. 15 )
4
Stylus illuminator
Lights to illuminate the stylus tip.
=
Illuminating the stylus tip
(p. 16 )
5
Stylus illuminator switch
The stylus illuminator lights in white and ascends to the position at
which the stylus tip is illuminated.
=
Illuminating the stylus tip
(p. 16 )
6
Headshell
7
TEMPO slider
You can slide back and forth to perform fine adjustment of the rota-
tion speed.
=
Adjusting the pitch
(p. 15 )
8
Tone arm
=
Adjustment
(p. 11 )
9
Arm clamper
Clamps the tone arm.
a
Arm rest
Serves as the support base for the tone arm.
b
Lifter lever
The tone arm goes up when the lever is pulled up. The tone arm goes
down when the lever is pushed down.
c
Arm lifter
This device is used to move the tone arm up and down. It is operated
by the lifter lever.
d
ANTI SKATING dial
When a record is played, there is power to pull the stylus tip toward
the inner perimeter. By matching this dial to the stylus pressure
value, that power is eliminated.
=
Adjusting anti-skating
(p. 12 )
e
HEIGHT ADJUST lock
Locks the adjusted height of the arm.
=
Adjusting the arm height
(p. 12 )
f
HEIGHT ADJUST dial
Used to adjust the height of the tone arm.
=
Adjusting the arm height
(p. 12 )
g
Balance weight
Used to balance the tone arm and adjust the stylus pressure.
=
Adjustment
(p. 11 )
h
Stylus pressure adjustment ring
Used to match to the appropriate stylus pressure of the cartridge.
=
Adjusting the stylus pressure
(p. 11 )
i
Headshell stand
Used to stand the headshell up.
j
Adapter for EP record
Used to play standard EP records.
=
To play a standard EP record
(p. 16 )
