Pinter MANOCOMB-IP65, Operating Instructions Manual

Page: 32 / 56

MANOCOMB®-IP65 Operating Instructions
Cleaning the device
Never use solvents or harsh detergents.
Clean only with a slightly moist cloth, use only water and if necessary a mild
detergent.
Disposal
Dispose the device in accordance with the regulations in your country.
3. Scope of supply
Delivery includes:
•
1x MANOCOMB-IP65 Pressure Switch
• 1x operating instructions
• if ordered/specified connectors (either installed or as accessory pack)
NOT included:
mounting screws, mounting bracket, process-side gaskets/seals
Above mentioned components are available individually or as a complete ac-
cessory kit.
4. Application
The MANOCOMB-IP65 is a Pressure Switch for industrial applications and re-
flects the state of the art.
The MANOCOMB-IP65 is approved for use:
•
as pressure monitor and/or pressure limiter according to Pressure Equip-
ment Directive 2014/68/EU (Category IV, Equipment with safety func-
tion, Modules B+D), VdTÜV leaflet Druck 100
• pressure switches for pressure limiting according to TRD604 in steam
and hot water boilers with rating „special construction”
• as a limiter device for water-tube boilers according to DIN EN 12952-11
and shell boilers according to DIN EN 12953-9
The MANOCOMB-IP65 is ssuitable for installing safety-related functions (SIF)
according to IEC61511:
•
SIL 1 or SIL 2 (as a single device)
• SIL 3 (in combination of two devices)