Pinter MANOCOMB-IP65, Operating Instructions Manual

Page: 30 / 56

MANOCOMB®-IP65 Operating Instructions
1. About these instructions
These instructions contains important information, in order to safely and pro-
perly install, operate and maintain the MANOCOMB-IP65 Pressure Switch and
also information on how to fix simple failures youself.
Before working with the MANOCOMB-IP65 Pressure Switch make sure to have
completely read and understood this instruction, especially chapter
„02 For
your safety“ !
Related Documents
The MANOCOMB-IP65 pressure switch is part of a system. Also take note of
instructions of other components and/or systems, these include i.a.:
•
system documentation of the engineering/construction company
2. For your safety
The MANOCOMB-IP65 Pressure Switch is being manufactured according to
the current state of the art and safety rules.
Nevertheless, there is a risk of bodily injury and material damages, if you do not
observe the following general safety and health warnings in this guide:
1.
Read these instructions thoroughly and completely before working with
the MANOCOMB-IP65 Pressure Switch.
2. Keep these instructions so they are always accessible and available to
all users.
3. Always forward the MANOCOMB-IP65 pressure switch to third parties
with these instructions.
4. In addition, observe generally valid, legal and other binding regulations
of the European or national legislation as well as the regulations in your
country for accident prevention and environmental protection.
Intended use
The MANOCOMB-IP65 pressure wwitch is a signal element that can be used
for measuring pressure in pressure lines for - depending on model - gases, va-
pours, liquids or suspensions.
The setted values are being transformed into - depending on model - electric or
pneumatic, or both output signals.
•
Keep within the performance limits mentioned in the technical data
• The device must not be altered
• Intended use also presumes, that you have read and understood these
instructions, especially chapter “02 For your Safety”.
NOT intended use
Not intended use is considered especially, but not only when you operate the
MANOCOMB-IP65 pressure switch
•
in areas or applications not mentioned in these instructions
• under conditions/circumstances which differ from those mentioned in
these instructions.
Necessary qualifications of staff
Both installation and setup require essential electrical knowledge as well as
knowledge about the technical terms used.