Pintek PW-3063R, Instruction Manual

Page: 4 / 16

Notice Before Operation
DC POWER SUPPLY
1. Unpack the instrument:
After receipt of the instrument, immediately unpack and inspect it for any damage which
might have been sustained during transportation or shortage of accessories. If any sign of
damage or shortage of accessories are found, immediately notify the dealer.
2.Environments:
Operational temperature of the instrument is 10
℃
to 40
℃
(50
℉
to 104
℉
) at lower than
90%R.H. Operation of the instrument outside of this temperature range may cause
damage to the circuits.
3.Check the Line Voltage:
The instrument can operate on the line voltages list below and this voltage can be set by
inserting the line voltage selector plugged in the corresponding position on the rear panel.
Before connection the power plug to an AC outlet, be sure to check the set up with line
voltage.
1
Selector Line Voltage
Fuse
115V
230V
100~125V 50/60Hz
220~240V 50/60Hz
PW-3063R PW-4063R
T10A
T6A
T10A
T6A
Hints for operation:
1
.
Do not place heavy objects on this instrument.
2. Do not place a hot soldering iron on or near this instrument.
3. Never insert wires, pins or other metal object into ventilation fan.
4. Never move or pull the instrument with power cord or output lead, especially never move
instrument when power cord or output lead is connected.
5. If the instrument is used in the way not specified in this manual, the protection provided
by the equipment may be impaired.
WARNING
The following precautions must be observed to prevent electric shock.
* Disconnect the mains plug before and during fuse replacement.
1. To avoid electrical shock, only qualified personnel should operate this instrument.
2. Do not open the cover of this instrument. Only qualified electrician should perform the
needed services inside this instrument.