10
PINNACOLO IBRIDO HYBRID GAS-WOOD PIZZA OVEN
INSTALLATION
1. Lay the Left Side Panel (Part No. 13), and install the Left Front Support Leg Assembly (Part No. 22) and the Left Rear Support Leg
Assembly (Part No. 23) as shown in the figure. When installing the 1/4” 12mm Large Flat Head Screw (Part No. 50), 3-5mm tolerance
needs to be reserved. no need to lock tightly.
2. Install the Right Panel (Part No. 29), Right Front Support Leg Assembly (Part No. 26), and Right Rear Support Leg Assembly
(Part No. 28), as in Step 1.
STEP 1
Partial View A
Ratio 1:5
1/4” 12mm Large Flat Head Screw (Black): 6 pieces
5/32” Screw: 10 pieces
5/32” Flat Gasket: 10 pieces
Partial View B
Ratio 1:5
Partial View C
Ratio 1:5
Pinnacola_Gas_PizzaOven_Manual_BLK.indd 10
Pinnacola_Gas_PizzaOven_Manual_BLK.indd 10
2021-07-02 3:24 PM
2021-07-02 3:24 PM
