Step 54: Secure two sections together with 1/2" x 2-1/2"
carriage bolts through 5/8" recessed holes and install
1/2" washer, lock washer, and nuts on threads of 2-1/2"
long carriage bolts. Tighten with 3/4" socket wrench.
Step 53: Overlap swing
arm inside playhouse and
line up two 5/8" recessed
holes toward center of
swing arm.
Step 55: Line up swing
arm on back wall so
that the 1/2" recessed
holes on both sides are
centered on the outside
studs on the back wall.
Step 56: Secure swing
arm to back wall with
four 3/8" x 4" lag bolts
with washers, there are
two holes at each side.
Step 57: Install spring
clips and swings on to
swing hangers.
Congratulations, this completes the construction of your kit! Follow
manufacturer’s instructions for applying roof shingles and paint to your
liking. It will be necessary to check for splinters and screws that protrude
through surfaces during and after the entire assembly process. Be sure to
remove sharp objects and check play set periodically for loose hardware.
© Pinnacle Play Systems
page 11
