Chapter 3: Installation and Setup
MMG Installation, Setup, and Operations Guide
43
2.
In the Render/Fuse Codec Pres. dropdown list box, select the Codec Preset value you just
created. For this example we select the Preset 4: HD420 @ 80MBit/s.
Figure 3-46: Timeline properties settings for HD
XSend a sequence with HD420
1.
To XSend a sequence right-click the sequence you want to send, select the submenu
XSendTo and here the menu point XSendToMSS.
2.
When the XSend to XSend To MSS dialog appears, leave settings as default and click OK.
3.
The IBP Settings dialog appears.Select the <MPEG-2 MP@HL> Reference Set. Change the
Bitrate mode to Constant (CBR). Drag Maximum Bit Rate slider to 80.00. Its ok to leave the
other settings as default
(see Figure 3-38 on page 37)
.
4.
Click OK in the Fuse Sequence dialog that appears.
