NEVER LEAVE HEATER UNATTENDED WHILE BURNING,
CONNECTED TO A POWER SOURCE, OR WHILE
CONNECTED TO A FUEL SOURCE
© 2017, Pinnacle Climate Technologies, Inc.
Convection Heater User's Manual
Assembly Instructions
What’s In The Box
Attaching The Upper Housing
•
Tools Required: Phillips Screwdriver
1.
Slide Upper Housing straight up and off of
lower housing and remove all packed items
from inside the heater. (See Figure 4)
2.
Remove all packaging protecting the heater
during shipping. Retain caps for covering the
inlet connector and regulator hose fro storage.
3.
Attach three (3) screws to the bottom row of
holes in the lower housing. (See Figure 5)
4.
Slide upper housing over lower housing,
lining up the four remaining screw holes.
Insert three (3) screws and tighten securely.
(See Figure 5)
NOTE: Save carton and packaging material
for later storage.
11 mm Screws (6)
Regulator (1)
Upper Housing (1)
Missing Parts? Please Call 866-676-1989 For Assistance
Figure 4
Figure 5
5
