-5-
The left-over wax can be melted and reused for application next time.
To clean your pot, please ensure that the appliance is unplugged but still warm.
Use cotton muslin strips or paper towels to wipe clean. You can also use a wax
warmer cleaning solution or a small amount of oil.
PRO TIPS
To achieve a more effective hair removal result, we strongly recommend you
to:
► Apply wax in direction with hair growth and remove in opposite.
► Hydrate and exfoliate a day or two prior to waxing.
► On the day of waxing, avoid using any lotions or creams.
► When removing, pull the wax parallel and close to your waxed skin.
► Avoid undue sun exposure for 24-48 hours.
► Exfoliate after at least 24 hours to help prevent ingrown hairs.
► Get on a regular waxing schedule and avoid shaving in between waxing.
HOW TO USE THE WAX BEANS
Application of hard wax depends on the area to be waxed and how coarse the hair is.
To perform an effective result, it's recommended that you follow
the instructions below:
1. Allow the wax to melt completely. We recommend a temp between 150-180℉.
2. The best indication that your wax is the right applicable temperature is when it resembles
the consistency of thick honey.
3. Always use with caution. It’s important to test a small amount of melted wax on the inside
of your wrist before application.
4. Make sure your skin is completely dry before waxing. Apply some baby powder to soak
up any excess moisture if necessary.
5. Using the applicator, apply wax in direction of hair growth. Use firm pressure to ensure
each hair is shrink-wrapped with wax.
6. Wait 30-45 seconds and allow the wax to harden.
7. It's ready to be removed as soon as it's no longer sticky to the touch. Hold skin taut. Flick
the edge of the wax up and pull quickly AGAINST direction of hair growth.
8. Repeat over different sections until the desired area is soft, silky hair-free.
READ ALL INSTRUCTIONS BEFORE USING.
EASY CLEANUP OF WAX POT
Note:
You don’t need to clean the wax pot after each use!