7
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the temperature dial is set to the
“OFF” or “0” position.
Always unplug the thermostat control/ probe from the unit before cleaning. Remove the
thermostat control/ probe by gripping the control on either side firmly and pulling. Do not pull on
the cord to remove the thermostat control/ probe from the pan.
Never allow the thermostat control/ probe to come into contact with any liquid. To clean the
thermostat control/ probe, gently wipe it with a soft dry cloth or paper towel.
Clean the body of the frying pan while it is still warm after use. Be careful as it may still be hot.
Clean when the frying pan is comfortable to the touch. The frying pan should be cleaned with a
damp cloth. Do not let water enter the appliance. Clean the frying area of the unit with a damp
sponge. Should food not come off immediately, soak the unit with warm water for a few
minutes, and then try again. Do not scrub the unit as this will damage the non-stick coating.
Do not use bleach or other abrasive substance or solvents to clean your appliance as it can be
damaging to the finish.
Do not immerse the unit in water or any other liquid, or hold it under a running tap.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Rinse and dry with a clean, dry, soft cloth.
After cleaning, completely wipe the frying pan dry with a soft cloth. Clean the frying pan after
each use.
To maintain a longer life of the non-stick coated surface on the inside of the pan, apply a very
light coat of cooking oil to the non-stick coating with a paper towel before storing. Repeat
periodically.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that all
parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
