22
DIGITAL VIDEO RECORDER
Zooming
During live view mode or playback, it is possible to zoom into a section of the screen to get a
close-up view of the screen.
1. To activate the digital zoom, select the full screen display of the camera you wish to
zoom.
2. Then press the
[ZOOM]
button. Zoom area box pops up, as shown below.
3. Move the box to the desired position using Direction [
] buttons.
4. Press [+] button to enlarge the image. Press [ - ] button to zoom out the image.
5. Press [CANCEL] button to return normal mode.
<Note>
If the Zoom button is pressed while in a multiscreen display, zoom operation is not
activated.
Spot Monitor
In addition to the Main Monitor, attaching a Spot Monitor enables user to monitor specific
channels independently form the main monitor
y
Press
[Spot]
button on the remote controller or Shuttle hold button on front, then press
number button you wish watch as full screen.
y
Press
[Spot]
button twice to auto switch cameras. Sequence interval can be set from the
Sequential Setup.
y
When an alarm has been triggered, that specific channel will go into Full Screen.
x 2
x 8
23
DIGITAL VIDEO RECORDER
OPERATION
Main Menu Overview
When the DVR is powered on, Live Viewing screen will appear after initialization about 30sec.
Press
[MENU]
button to access the main menu. An Admin Password Box will appear. Enter
the password using Numeric buttons. Default password is ‘
000000
’. Main Menu appears after
proper password entered, shown as below.
<Note>
Factory default Admin/user password is
[000000]. It is recommended to change the
“PASSWORD” when you install the DVR. Refer to [System Setup].
１
.
Use Direction buttons
[
] to select the desired menu. Items selected in the menu are
represented in color.
２
.
Press [ENTER] button to select the menu and display Sub-Menu. Use Left/ Right buttons [
] to
select on TAP menu.
Selected items changed into
[ORANGE]
color.
* It is automatically saved changes when you move between TAP menus.
3. Press
[CANCEL]
to exit a menu without changes.
Press
[ENTER]
button to exit a menu with saving changes.
Selected Not selected
