Pinetron AHD1K series User Manual Download Page 63

Page: 63 / 87

DIGITAL VIDEO RECORDER

8.4. UPDATE

1. Download the latest firmware file and copy to USB Flash memory stick in the

Root

directory.

2. Connect or insert into Front USB. (If you are under recording, please stop the recording)

3. Using direction button to move [Start] button. Press

[+]

button to find upgrade file. If the

DVR finds a valid update file, update menu is activated.

4. Press

[-, +]

button to find proper upgrade file, Version information is displayed. If there are

several valid update files, please check the display for changing.

5. Using direction button to move [Start] button then press

[+]

button to start update

While it

’s updating, ”in progress” message is displayed.

6. After the update process is complete,

“Success” message is displayed. Press [+] button to

restart. The DVR issues a single beep.

NOTE1:

Do not switch OFF or PRESS any key during the update process.

NOTE2.

Please consult with your installer or seller before update DVR.

<NOTE >:

Please make sure if you download all of files below (15M).

XXXXXX_R0000.img

Summary of Contents for AHD1K series
























































































Search results

Summary of Contents for AHD1K series

Reviews:

Related manuals for AHD1K series

Brands by name

Popular brands

Pinetron AHD1K series, User Manual

Search results

Summary of Contents for AHD1K series

Reviews:

Related manuals for AHD1K series

Brands by name

Popular brands