background image

Allgemeine Angaben zum Gerät/General Information - Unit/Caractéristiques du boîtier

Max.Querschnitt des Außenleiters (Schraubklemmen)/Max. cable cross section (screw
terminals)/Capacité de raccordement (borniers à vis)
Einzelleiter/Single- core/Conducteur unique

flexibel ohne Aderendhülse/flexible without crimp connectors/souple sans embout

0,2 ... 2,5 mm²

flexibel mit Aderendhülse/flexible with crimp connectors/souple avec embout

0,25 ... 2,5 mm²

Mehrleiter (2 Leiter gleichen Querschnitts)/Multi-core (2 cables with the same cross
section)/Conducteur multiple (2 câbles de même diamètre)

flexibel mit Aderendhülse ohne Kunststoffhülse/flexible with  crimp connectors without
insulating sleeve /souple avec embout sans chapeau plastique

0,25 ... 1 mm²

flexibel mit TWIN-Aderendhülse mit Kunststoffhülse/flexible with TWIN crimp
connectors

0,5 ... 1,5 mm²

with insulating sleeve/souple avec embout TWIN avec chapeau plastique

Max.Querschnitt des Außenleiters (Käfigzugfederklemmen) /Max. cable cross section (cage
clamp terminals)/Capacité de raccordement (borniers à ressort)

flexibel ohne Aderendhülse/flexible without crimp connectors/souple sans embout

0,2 ... 1,5 mm²

Gehäuse mit Käfigzugfederklemmen/Housing with cage clamp terminals/
Boîtier avec borniers à ressort/

Abisolierlänge/Stripping length/Longueur de dénudage/

8 mm

Klemmstellen pro Anschluss/Terminal blocks per connection/bornes par raccordement

2

Anzugsdrehmoment für Anschlußschrauben (Schraubklemmen)/
Torque setting for connection screws (screw terminals)/Couple de serrage (borniers à vis)

0,6 Nm

Schutzarten/Protection/Indice de protection:

Einbauraum (z. B. Schaltschrank)/Mounting (e.g. Panel)/Lieu d'implantation (ex. armoire)

IP 54

Gehäuse/Housing/Boîtier

IP 40

Klemmenbereich/Terminals/Bornes

IP 20

Gehäusematerial/Housing material/Matériau boîtier

Kunststoff/Plastic/Plastique
Thermoplast Noryl SE 100

Abmessungen (Schraubklemmen) H x B x T/Dimensions H x W x D (screw terminals)/
Dimensions (borniers à vis) H x P x L

94 (3.70") x 45 (1.77") x 121 (4.76") mm

Abmessungen (Käfigzugfederklemmen) H x B x T/Dimensions (cage clamp terminals)
H x W x D/ Dimensions (borniers à ressort) H  x L x P

101 (3.98") x 45 (1.77") x 121 (4.76") mm

Gewicht/Weight/Poids

320 g

Abmessungen in mm ('')/Dimensions in mm ('')/Dimensions in mm ('')

Gehäuse mit steckbaren Schraubklemmen/
Housing with plug-in screw terminals/
Boîtier avec borniers débrochables à vis

Gehäuse mit steckbaren Käfigzugfederklemmen/
Housing with plug-in cage clamp terminals/
Boîtier avec borniers débrochables à ressort

75  (2.95")

94 (3.70")

121  (4.76")

45

(1.77")

87 (3.42")

45

(1.77")

75 (2.95")

101 (3.98")

121  (4.76")

87 (3.42")

Summary of Contents for PSWZ X1P

















Reviews: