Overview
Operating Manual PSSu E S INC 24V se(-T)
1001380-EN-04
7
2
Overview
2.1
Module structure
A module consists of
}
Electronic module and
}
Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and are used to connect
the field wiring. The electronic modules are inserted on to the base modules and determine
the module's function.
Details of the base modules that can be used are available in the chapter entitled “Intended
Use”.
2.2
Module features
The product has the following features:
}
Connection of a rotary encoder with HTL output signal
}
Inputs for
– Counter pulses (inputs A, B), single-pole, referenced to earth (single-ended)
– Zero pulse (inputs C), single-pole, referenced to earth (single-ended)
– Stopping the counter (input G, Gate)
– Memory function (Input L, Latch)
– Rotary encoder status (Input S, Status)
}
Outputs:
– 24 VDC supply voltage for encoder
– 1 semiconductor output (switches depending on the counter status)
}
Resolution of the counter and latch memory: 32 Bit
}
Operating modes:
– Incremental encoder
– Counter
}
Pulse multiplication (up to four times)
}
No potential isolation between periphery supply and inputs/outputs
}
LEDs for:
– Data transfer per input A, B, C
– Status per functional input (Gate, Latch, Status)
– Module error
}
For standard applications in system environment A and B
}
T-type:
PSSu E S INC 24V se-T: for increased environmental requirements
