PSEN b5
Operating Manual PSEN b5
1002471EN03
8
Installing the gate mounting plate and frame plate
INFORMATION
Installation is only possible when the bolt is open!
During installation make sure that:
}
The installation surface on the gate and gate frame is flat.
}
The top edge of the gate mounting plate is offset against the top edge of the frame
plate by 55 mm (see also
Dimensions [
14]
).
INFORMATION
To increase manipulation protection we recommend that you make at least
one screw each unusable at the gate mounting plate and at the frame plate
after installation.
Install safety switches PSEN cs and PSEN me
[7]
[2]
[3]
[4]
[8]
[9]
[10]
[11]
[12]
[13]
[1]
[6]
[5]
Legend
Actuator PSEN cs
[1] Hexagonal screw M4x40 (1x)
[2] Spring ring (2x)
[3] Washer (2x)
[4] Adapter for actuator PSEN cs
[5] Fixing screw M4x10 (2x)
[6] Actuator PSEN cs
[7] Oneway screw M4x50 (1x)
[8] Gate mounting plate with bolt and handle