PSEN b5
Operating Manual PSEN b5
1002471EN03
6
Fig.: Left: Bolt with safety switches assembled for left hinged gate; Right: Bolt with safety switches
assembled for right hinged gate
Fig.: Left: Adapter PSEN cs; Right: Adapter PSEN me
The PSEN cs or PSEN me type actuator is installed on the gate mounting plate using an
adapter. The corresponding safety switch is installed on the frame plate. If the operator
opens the safety gate, the safety switch is actuated simultaneously.
The bolt is suitable for right and left hinged gates. A padlock may also be fitted through the
slot on the bolt. This stops the bolt from being opened or closed unintentionally or without
authorisation.
The bolt is suitable for installing on standard aluminium profiles and machine enclosures.
Safety
Only install and commission the bolt if you have read and understood these operating in
structions plus the operating instructions for the PSEN cs safety switches and are familiar
with the applicable regulations for health and safety at work and accident prevention.