PSEN b5
Operating Manual PSEN b5
1002471EN03
13
INFORMATION
The fastening clip [5] serves to contain the plugin connection of the safety
switch and the outgoing cable. The length of the cable may vary based on
tolerance. Accordingly, the fastening clip [5] can be fixed in one of the holes
using the fixing screw [4]. The fastening clip is available from Escha Bauele
mente GmbH, order no 8047664.
INFORMATION
To increase manipulation protection we recommend that you make at least
one screw each unusable at the gate mounting plate and at the frame plate
after installation.
Installing only safety switch PSEN me
Installing the actuator
1. Install the actuator PSEN me together with the corresponding adapter plate as shown
under "
Install safety switches PSEN cs and PSEN me [
8]
".
2. Secure the oneway screw as shown.
3. Please note the details on installation listed there.
Installing the safety switches
a
Install the safety switch PSEN me on the frame plate as described under "
Install safety
switches PSEN cs and PSEN me [
8]
".
}
Please note the details on installation listed there.