Pilz PNOZ X13, Operating Manual

Page: 15 / 21

PNOZ X13
Operating Manual PNOZ X13
20187-EN-07
| 15
Technical details
General
Certifications CCC, CE, EAC (Eurasian), TÜV, cULus Listed
Electrical data
Supply voltage
Voltage 24 V
Kind DC
Voltage tolerance -15 %/+10 %
Output of external power supply (DC) 4,5 W
Residual ripple DC 160 %
Duty cycle 100 %
Max. inrush current impulse
Current pulse, A1 5 A
Pulse duration, A1 1,2 ms
Inputs
Number 2
Voltage at
Input circuit DC 24 V
Start circuit DC 24 V
Feedback loop DC 24 V
Current at
Input circuit DC 60 mA
Start circuit DC 50 mA
Feedback loop DC 5 mA
Max. overall cable resistance Rlmax
Single-channel at UB DC 100 Ohm
Dual-channel with detection of shorts across con-
tacts at UB DC
10 Ohm
Relay outputs
Number of output contacts
Safety contacts (N/O), instantaneous 5
Auxiliary contacts (N/C) 1
Max. short circuit current IK 1 kA
Utilisation category
In accordance with the standard EN 60947-4-1
Utilisation category of safety contacts
AC1 at 240 V
Min. current 0,01 A
Max. current 8 A
Max. power 2000 VA
DC1 at 24 V
Min. current 0,01 A
Max. current 8 A
Max. power 200 W