Pilz 750330, Operating Manual

Page: 60 / 99

Commissioning
Operating Manual PNOZ s30
1001715-EN-15
60
Level Menu designation Description Settings
1 Output Out Logic Setting for the switching direction
of the semiconductor outputs
2 output
(Out 1 ... Out 4)
Logic
Default
N/O contact
Select the switching direction of
the semiconductor outputs Out
1 ... Out 4:
N/O contact (normally energised
mode)
N/C contact (normally de-ener-
gised mode)
- N/O contact
- N/C contact
1 Name of Configura-
tion
Default
Default
Enter name of the configuration
The name may be a max. of 8
characters in length
It is stored on the chip card
........
1 Password Settings Change passwords
Reference: In the "Default Set-
tings" menu, the passwords are
reset to the default setting: 00000.
2 Master PW Change master password 0000 ... 9999
2 Customer PW Change customer password 0000 ... 9999
2 Language
Default
English
Select menu language -English
- German
- French
1 Default Settings Select whether the parameters are
to be reset to the default settings
Yes: All parameters are reset to
the default values. The language
is set to English and all passwords
are set to 0000.
- Escape
- Yes
6.2.7.6 Information
Level Menu designation Description Display/Settings
1 System Time Time that the device is switched
on xxx.xxx h
xx min xx s
1 Max. Speed
Track AB
Max. measured linear/rotational
speed at tracks A and B
The value can be reset to 0
0 … 4.29 MHz
or the corresponding value in the set
unit
Reset:
Reset:
- Yes ?
- No