Security-relevant log messages
Operating Manual PCOM sec br2
1004534-EN-04
| 49
15
Security-relevant log messages
Entry ID
Error message
107
The file "{{filename}}" on the USB memory was changed.
108
The active configuration was changed by the user "{{username}}".
109
The start configuration was changed by the user "{{username}}".
200
IO device {{ip_address}}: MAC address monitoring in the protected network
led to contradictory answers: {{mac1}} vs {{mac2}}
201
IO controller {{ip_address}}: MAC address monitoring in the unprotected
network led to contradictory answers: {{mac1}} vs {{mac2}}
401
User "{{username}}", IP address: {{ip}}: Login attempt failed.
402
The IP address {{ip}} is locked because too many login attempts have
failed.
600
Device "{{name}}", IP address {{ip}}: The project CRC has been changed to
"{{crc}}".
701
Device "{{name}}", IP address {{ip}}: The device's MAC address was
changed to {{mac}}.
702
Device "{{name}}", IP address {{ip}}: Device is not active.
1000
The start configuration was reset and the logging events were deleted in re-
covery mode.
1001
The firmware with version {{version}} has been installed in recovery mode.
1002
The firmware with version {{version}} has been installed in recovery mode.
1100
User: "{{user}}"; IP address: {{clientIP}}: IP spoofing has been detected.
Fake IP address: {{spoofedIP}}
1101
User: "{{user}}"; IP address: {{clientIP}}: MAC spoofing has been detected.
Fake MAC address: {{spoofedIP}}.
1105
User "{{username}}", IP address: {{ip}}: Login attempt failed.
1106
Some Client connections have been rejected because the maximum num-
ber of Clients has been reached.
1107
The IP address {{ip}} is locked because too many login attempts have
failed.
1108
Access to web service denied for IP address {{ip}}.
1109
User "{{username}}", IP address {{ip}}: The IP address is blocked. Too
many attempts to change the password.