Contents:
6. Machine Maintenance
6.1. Cleaning
6.2. Removal/disposal of chips
6.3. Coolant system cleaning
6.4. Lubrication
6.4.1. Lubrication Plan for ARG 330 S.A.F.,
ARG 330 plus S.A.F.
6.4.2. Lubrication Plan for ARG 400 plus S.A.F.
6.4.3. Lubrication Plan for ARG 380, 500 plus S.A.F.
6.5. Principles of Hydraulic Unit Maintenance
6.5.1. Work safety
6.5.2. Commissioning
6.5.3. Hydraulic Liquids
6.5.4. Hydraulic Mineral Oils
6.5.5. Service intervals
6.5.6. Oil Refill and Filter Replacement
7. Faults and Remedies
7.1. Repairs
7.2. Failures - Potential Causes and Remedies
8. Saw Blades
8.1. Saw Blade Design
8.2. Selection of Tooth Size
8.3. Optimum Workpiece Clamping
8.4. Running-in New Saw Blades
8.5. Factors Influencing Saw Blade Service Life
8.6. Values Recommended for Cutting
9. Nameplate
10. Electrical Wiring Diagram
11. Hydraulic Unit Wiring Diagram
11.1. Hydraulic Unit Wiring Diagram
ARG 330 S.A.F., ARG 330 plus S.A.F.,
ARG 400 plus S.A.F.
11.2. Hydraulic Unit Wiring Diagram
ARG 380, 500 plus S.A.F.
12. Accessories
12.1. Laser Guideline Light
12.1.1. Activation and deactivation of the laser beam
12.1.2. Laser indication on the machine
12.1.3. Adjustment
12.2. Oil Mist Lubrication
12.3. Vertical vice for HVP bundle cutting
0. General
0.1. Safety Provisions
0.2. Scope of Use / Use According to Designation
0.3. Requirements on Operators
0.4. Machine Requirements - Safety Devices
0.5. Protective Covers
1. Transport and Storage
1.1. Surface Protection
1.2. Packing
1.3. Disassembly/Repacking
1.4. Disposal
2. Technical Data
3. Installation
3.1. Space Requirements
3.2. Removal of Temporary Transport Beams
and Fixation of the Machine
3.3. Machine Installation
3.4. Connection to the Mains
3.5. Arm release in ARG 380, 400, 500 plus S.A.F.
4. Machine Description
4.1. Control Panel
4.2. Control Valve - Saw Blade Feed to the Cut
4.3. Saw Blade Feed Pressure Control
4.4. Vice
4.4.1. Adjustment od the Lateral Play of the Vice in ARG 330 S.A.F.
and ARG 330 plus S.A.F.
4.4.2. Cutting Angle Settings
4.5. Arm - saw blade guidance
4.6. Removal of Protective Housing
4.6.1. Removal of Protective Housing of the Saw Blade Arm
ARG 330 S.A.F., ARG 330 plus S.A.F., ARG 400 plus S.A.F.
4.6.2. Removal of Protective Housing of the Saw Blade Arm
ARG 380, 500 plus S.A.F..
4.7. Replacement, Tensioning and Adjustment of the Saw Blade
4.8. Guide Heads - Adjustment
4.9. Hydraulic Unit
4.9.1. Vice Clamping Force Setting
4.10. Cooling System
5. Commissioning
5.1. Security Check
5.2. Cutting Procedure
Dear customer,
thank you for purchasing our product. We wish you a lot of success with it in your business. Please pay close attention to
the following instructions in order to ensure faultless operation of the machine.
© 2016
All rights, particularly the right to make copies of, to distribute and translate this instruction manual, are
reserved. No part of this instruction manual may in any form (printing, copying, microfilm or other means) be reproduced
or stored, processed, copied or distributed using electronic systems without a permission by PILOUS.
ver. 1/6/2016
ORIGINAL INSTRUCTION MANUAL
Summary of Contents for ARG 330 plus S.A.F.
Page 2: ......
