4.
4
.1.
Adjustment Procedure
-
Lateral Play of the Vice
for ARG 330 S.A.F. and ARG 330 plus S.A.F.
Open the movable vice jaw to maximum extent.
‚
Loosen the M8 LOCKING NUTS and loosen the M8 VICE PLAY SETTING SCREWS.
Carefully tighten the first VICE PLAY SETTING SCREW (right at the movable clamping jaw) up to a point, where you feel that the
screw (through a supporting ball) rested on the bar that pushes to the groove.
„
In this position, tighten the screw with an M8 LOCKING NUT against loosening.
…
Use the handwheel to move the VICE MOVING BODY, so that the next VICE PLAY SETTING SCREW is in the same position as
the previous screw.
†
Repeat points
,
„
,
…
until the vice is completely closed and therefore adjusted.
You can watch the video with instructions on www.pilous.cz.
Adjust the lateral play of the vice in the following way:
ARG 330 S.A.F.
ARG 330 plus S.A.F.
MOVABLE
CLAMPING JAW
HAND WHEEL
VICE MOVING BODY
“T” GROOVE
FIXATION SCREWS
LOCKING NUT M8
VICE PLAY
SETTING SCREWS
MAXIMUM EXTENT
FIXED
CLAMPING JAW
FIXED
CLAMPING JAW
MOVABLE
CLAMPING JAW
VICE MOVING BODY
HAND WHEEL
Summary of Contents for ARG 330 plus S.A.F.
Page 2: ......
