Pilous ARG 105 mobil, Instruction Manual

Page: 8 / 31

3. Installation
3 .1.Space Requirements
ARG 105 mobil, ARG 130 (super), ARG 130 (super) TK and ARG 130 mobil is a machine that can be transported flexibly according to
user's needs and no special requirements on the required area need to be followed. Generally, the machine must be set up on a level
surface in a way that prevents its vibration. You can install ARG 130 (super) on any suitable and even floor (concrete) in a factory hall.
Observe the allowed floor load. Set the machine in level position using 4 screws in corners of the base. Remove the pallet. Set the
machine on the place designated for use. Remove the anticorrosion film and dust from sliding surfaces and apply oil. Attach the
length stop. Ensure connection to the mains (see section 3.3.). Only for saws with cooling systems: Check whether the outlet coolant
pipe has not fallen out of the coolant tank cover during transport and whether it is fitted well inside. Pour the coolant (approximately
15 liters) into the coolant tank
.
Recommendations/requirements:
• Allow for sufficient space for the feeding and removal of the workpiece and the machine maintenance - the operator's working area
should be delineated at 1 m minimum around the machine and 0.5 m around the roller conveyors.
• Install roller conveyors and/or a case for cut pieces collection for a safe handling of workpieces and to prevent accidents due to
pieces falling off.
• Install a lift mechanism for heavy workpieces.
• Ensure proper lighting at the workplace
A
B
C min
C max
D min
D max
E
F
ARG 105 mobil
440
650
750
830
320
220
ARG 130 (super) K
610
370
1280
1540
980
1030
480
230
ARG 130 (TK, super)
550
810
980
1030
420
290
D
C
A
B
E
F
G
E
G 150 130 130
W hen handling coolants, risks linked to hazardous substances cannot be avoided. Observe the national norms
and recommendations and manufacturer's or your company's operating instructions related to safe handling
of coolants.
C min - the arm is lowered D min - the arm is lowered, the vice is closed
C max - the arm is raised D max - the arm is raised, the vice is opened