Throttle servo Installation
2 Measure and cut the extra wire
4. Epoxy the mounting tray in place
and secure with self-tapping screws
2. Measure and cut the extra wire
Then bend to a sharp of “z” as shown
Mount the throttle pushrod to engine.
A d
f f
t
3. Determine where the throttle servo
mounting tray is going to be mounted
on the engine box to get the straight
d
i
h
l li k
i
A drop of fast
cured gule
5. Finish the servo installation with
mounting screws
and precise throttle linkage connection
then make a mark
35