MAINTENANCE
RECOMMENDED GREASE TYPE:
MOBIL TH SCHyPM NGLI Grade 1/5 or equivalent HIGH PERFORMANCE LITHIUM BASED GREASE.
RECOMMENDED SPRAY
-
ON DRY LUBRICANT:
SPRAYON S00708 T.F.E. DRY LUBE, or GRAPHITE BASE LUBRICANT
AIR SYSTEM LUBRICATOR:
Use a high grade, light hydraulic oil in the air lubricator bowl. Set the drip rate for approximately one drop every 100 cycles.
(completely close valve and open 1/8 to 1/4 turn)
BARE STEEL PARTS:
Spray on Boeshield T
-
9 Waterproof Lubricant. (Pillar Machine part # S4410)
NOTE:
All support bearings on Ball Screws are sealed bearings and do not require additional lubrication.
Parts Requiring Maintenace
Complete Machine
Hourly
Table Surface Areas
Hourly
Electrical Cabinets (Including amplifiers and frequency drives)
Hourly
All sensors and Proximity Switches
Hourly
Carriage 'X' Axis linear Slide Bearings and Rails
Hourly
80 Hrs
Carriage Linear Slide Bearings and Rails
Hourly
80 Hrs
MAINTENANCE KEY:
Hourly:
Means maintenance listed should be performed as often as needed
during operation of the machine on an hourly basis.
Hours (Hrs):
Means the maintenance listed should be performed each time
the mahcine has been in operation for that length of time.
Example: Clean rails and grease each bearing with 1 pump of grease at zerk
fitting every 80 hours of operation. Verify that linear bearings are packed by
moving axis and inspecting way for fresh grease residue.
Clean
dust and
chip
buildup
Clean
grease
and
grime,
Give 1
pump of
grease at
zerk
fittings.
Maintenance to be
performed & time
schedule
Summary of Contents for CMJ-HSK
Page 15: ...ELECTRICAL SCHEMATIC...