11
Removing the electronics enclosure
In certain circumstances it may be necessary to remove and
replace the electronics enclosure.
Note: The electronics enclosure is a sealed unit and does not
contain any user serviceable parts. Do not attempt to open it
under any circumstances as this will invalidate your warranty.
To remove the electronics enclosure
1 Remove the four fixing screws holding the yellow top cover to
the main frame.
2 Carefully lift the yellow top cover (take care as the front panel
is wired to the main chassis) and place next to the unit.
3 Locate the electronics enclosure:
4 Disconnect the antenna and control connector
connections (twist their locking collars anti-
clockwise to release) from the electronics
enclosure.
5 Remove the two M4 bolts that secure the
electronics enclosure to base main frame.
6 Extract the electronics enclosure from the base
unit.
Electronics enclosure
Locking collars
Antenna connection
Control connection
