3
Evo panel layouts
Evo controllers are highly compact and yet
offer full master and slave capabilities.
POWER
Press and
release to
switch on,
press and
hold for two
seconds to
switch off
(see page
6).
RUN
Press to
begin (master
or slave)
operation
(see page
11).
Operation
mode
As master,
selects
the main
operation
mode for the
system as a
whole (see
page 11).
Text display
section
Shows setup
details,
timings and
error codes.
The arrow
and SELECT
buttons allow
you to change
settings (see
page 22).
COMMS
Flashes
green to
indicate
active links
with signal
heads (see
page 21).
MANUAL
ALL RED
Press to hold
all signals at
red see page
17).
LINK
Combines
two phases
to allow
more signal
heads per
approach
For other models, please see the next page
Ü
PEDESTRIAN
ONLY / LIGHTS
OFF
During setup,
places master
into dedicated
pedestrian mode
(see page 11
and page 12).
During operation,
places all signal
heads into
blackout.
ENABLE
AUX
CONTROL
Press to
allow remote
control.
MASTER/SLAVE
Determines the role of
this controller (see page
6).
PEDESTRIAN section
Contains all items needed to configure and
monitor (in master mode) up to four separate
pedestrian crossings (see page 10).
Phase MODE /
DEMAND
When setting up (as
master), determines
the signal head
configuration, e.g.
single or dual head or
off (see page 9).
During operation,
can be used to place
a demand on this
phase.
Combined
MAXIMUM GREEN
and ALL RED phase
timer
In master mode, this
button and 3-digit
readout are used to
set the red and green
timings for this phase
(see page 9).
Low battery
indicator
Illuminates to
warn that one
or both of the
remote heads on
this phase are
getting low on
battery charge
(see page 21).
ALL RED / MAX
GREEN selector
Press to change
between
adjusting the
MAX GREEN
and the ALL
RED timings on
all active phases
(see page 9).
DEMAND
This indicator
shows when
the microwave
vehicle detector
recognises an
approaching
vehicle (see
page 21).
Signal head mimic
During operation,
these indicators show
the signals currently
being given at the
head(s) for this phase
(left side = single
head; right side = dual
head).
For each phase
When the controller is used
as a slave, regardless of
which phase is set, the Phase
5/Slave mimics are used to
show what the Slave is doing.
Indicates that
the controller
supports 17
different radio
channels (see
page 13).
