manualshive.com logo in svg

Pik Rite HydraRam HR250, Operation And Parts Manual

Share
Download
Pik Rite HydraRam HR250 Operation And Parts Manual Download Page 17

Pik Rite Inc. | HR250 Manure Spreader 2020 | 

17 

 

CONTROLS 

 OPERATING THE BEATER 

To start beater, engage PTO lever slowly, at low engine rpm. 

 
To stop beater, disengage PTO. (See your tractor’s Operator’s Manual) 

 

For best spreading results, operate the tractor engine at “PTO RATED” speed. 
 

 
 

 
 

 
 

 OPERATING THE ENDGATE 

Contact of sliding floor/moving panel with endgate  
closed will cause damage.  To avoid contact with 
moving panel, endgate must be raised fully. 

 

Operate the endgate with the second auxiliary 
control valve lever. 
 

Endgate is not a metering device. 

Doing so may cause damage to the spreader.

 

 

 
 
 

 OPERATING SLIDING FLOOR 

MOVING PANEL USING METERING CONTROL VALVE 

To extend the sliding floor and moving panel lock control lever in operating position. 
 
To retract the sliding floor/moving panel, move control lever in opposite direction. 

 
See your tractor’s operating manual for information on how to control flow rates of your hydraulic system. 
 
Maximum hydraulic oil flow through the spreader control valve is 6.8 gpm. Trying to force through more oil than 
this, may create a pressure drop. 

 

Summary of Contents for HydraRam HR250





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands