Pik Rite HydraRam HR250 Operation And Parts Manual Download

Page: 12 / 84

| HR250 Manure Spreader 2020 | Pik Rite Inc.

SAFETY

OPERATE SPREADER SAFELY

Rotating parts can entangle or strike people, resulting in death or

personal injury.

Never enter a spreader while in operation.

Operate the spreader from the tractor seat only.

Do not exceed load capacity of the spreader. (See Transport section)

Reduce speed when turning or traveling on rough terrain. Avoid traveling
over loose fill, rocks, ditches or holes.

When working on inclines or slopes, travel uphill or downhill. Keep
tractor in gear when traveling downhill.

STAY CLEAR OF RAISED ENDGATE

Contact with a lowering endgate can cause death or personal injury.

Lower endgate and disconnect hydraulic lines before

servicing or adjusting.

STAY CLEAR OF ROTATING DRIVELINES

Entanglement in rotating driveline can cause serious

injury or death.

Keep tractor master shield and driveline shields in place at all times. Make

sure rotating shields turn freely.

Wear close fitting clothing. Stop the engine and be sure PTO driveline is
stopped before making adjustments, connections, or cleaning out PTO

driven equipment.

STAY CLEAR OF ROTATING BEATER

Rotating beater can entangle or strike causing death or personal injury.

Do not clean out or service spreader while beater is

rotating.

Disconnect PTO driveline and make sure all parts have stopped rotating
before cleaning or servicing.

Do not cut or weld on vertical beater attachment.

Serious injury or death could occur when operating.

Summary of Contents for HydraRam HR250





















































































Search results

Summary of Contents for HydraRam HR250

Reviews:

Related manuals for HydraRam HR250

Brands by name

Popular brands

Pik Rite HydraRam HR250, Operation And Parts Manual

Search results

Summary of Contents for HydraRam HR250

Reviews:

Related manuals for HydraRam HR250

Brands by name

Popular brands