Pik Rite HydraRam HR250 Operation And Parts Manual Download | Manualshive

Page: 15 / 84

background image

Pik Rite Inc. | HR250 Manure Spreader 2020 |

15

PREPARING THE TRACTOR

PTO Speed

Dimension (A)

540 rpm

356 mm (14in.)

POSITIONING DRAWBAR

Tractor PTO and machine driveline can be damaged. Be sure
drawbar length is properly set. If equipped with clevis, remove it.
Lock drawbar along tractor centerline with offset down.

Remove clevis if equipped.

Adjust drawbar length (A) to help prevent driveline damage.

A tractor drawbar support is required on tractors with a drawbar size
of 1-1/2 x 3 in. minimum

USING SELECTIVE CONTROL LEVERS TO CONTROL FLOOR SPEED

Floor and moving panel speed can be controlled by using tractor selective control lever to extend and retract
cylinders.
Adjust selective control valve lever to provide the slowest operating speed. (See your tractor operator’s manual).
Maximum hydraulic oil flow through the spreader control valve is 6.8 gpm. Trying to force through more oil than

this, may create a pressure drop.

SETTING HYDRAULIC SPEED ENDGATE OPERATION

Excessive operating speed may cause machine damage. Adjust selective control valve lever to provide

correct operating speed.

Adjust selective control valve lever, it should take two to three seconds to fully extend or retract the cylinder. (See
your tractor operator’s manual).

CHECKING TRANSMISSION/HYDRAULIC OIL LEVEL

Cycle all hydraulic cylinders fully two or three times.

Fully retract all cylinders.

Check transmission/hydraulic oil level. (See your tractor’s Operator’s Manual)

«
...
13
14
15
16
17
...
»

Summary of Contents for HydraRam HR250





















































































Reviews:

No comments

Related manuals for HydraRam HR250

POLAR TECH 90365

Brand: EarthWay Pages: 5

Brand: StarTech.com Pages: 2

Brand: Advanced Card Pages: 57

agromaster ITS-400P

Brand: FARMTECH Pages: 37

Brand: Winlong Industrial Pages: 11

MULTI-CARD 24-IN-1 READER

Brand: Lexar Pages: 10

Brand: Shopify Pages: 6

Brand: PAX Pages: 10

Brand: Power Fist Pages: 12

Brand: Datalogic Pages: 2

Brand: EC Line Pages: 6

Brand: ACS Pages: 19

Brand: Rosslare Pages: 2

Brand: xpr Pages: 10

Brand: by Pages: 11

Brand: ANXELL Pages: 8

Brand: Ortus Pages: 34

DS-K1200 Series

Brand: HIKVISION Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands