Pik Rite Hydra-Ram HR400, Operation And Parts Manual

Page: 16 / 88

16 | HR400 Manure Spreader 2020 | Pik Rite Inc.
PREPARING THE SPREADER
LUBRICATING THE MACHINE
Be sure the machine has been adequately lubricated.
(See Lubrication and Maintenance page.)
TIGHTENING WHEEL HARDWARE
Operating the spreader with loose wheel hardware will
damage the hub or wheel. Tighten hardware after initial
transport, after one hour of operation and every fifty hours
thereafter.
Tighten to 240 lb-ft of dry torque (180 lb-ft wet)
in the sequence shown.
Tire Size Wheel Size Tire Pressure
16.5 x 16.1 Implement 14.00 x 16.1 48 psi
11 R 22.5 22.5 x 8.25 75 psi
385/65 R 22.5 22.5 x 11.75 115 psi
500/50-22.5 Implement 22.5 x 16 40 psi
425/65R22.5 Truck Tires 22.5 x 13 115 psi
(Additional options may be available, please contact your
dealer for more information)
CHECKING TIRES
1. Check tires daily for damage or noticeably low pressure.
2. Repair any cuts or breaks as soon as possible.
3. Protect tires from exposure to sunlight and petroleum
products or chemicals.