CHAPTER 2. ANATOMY AND FUNCTIONS
9
For more options and details, see the Infinity Rules Input Split section
on page 24.
Series Loops
When Series Loops is
on
, you are in Series mode. This means that
only one of the two loops can play
at any given time. This is handy
for verse/chorus-type song structures.
When Series Loops is
off
, you are in Parallel mode. This means that
Loop 1 and Loop 2 can
play together
at the same time.
Sync Multi
Holding
the Sync Multi switch will toggle Sync Multi
on or off
.
Quickly pressing
the Sync Multi switch once Sync Multi is on,
cycles
through the sync multiplier factor
.
When Sync Multi is
off
, none of the sync multi lights are lit. In this
mode, the lengths of the two loops are
unrelated
and playback is
not
synchronized
.
When Sync Multi is
on
, the lengths of the two loops are synchronized.
The length of Loop 2 will be a
multiple of the length
of Loop 1, as
set by the multiplier factor indicated by the LED bar to the right of
the sync multi switch.
Loop 1 sets the initial length. Once recording on Loop 2 is initiated,
the Arm light will blink and it will wait to begin recording until the top
of the next loop cycle. Loop 2 will
automatically stop recording
and
begin playback when the proper length multiple has been reached.
