CHAPTER 2. ANATOMY AND FUNCTIONS
8
•
DUAL SOURCE mode is also intended for use with a stan-
dard (TS) instrument cable feeding the INPUT jack along
with a external MICROPHONE feeding the EXT MIC jack.
•
Using DUAL SOURCE mode, it is also possible to combine
both a TRS input carrying two audio sources with a third
audio signal feeding the EXT MIC jack.
•
When in the up position, the DUAL SOURCE function is
turned OFF and the INPUT jack expects a TS input. This
is called SINGLE SOURCE MODE.
Note:
In SINGLE SOURCE MODE the audio on the TIP
of the INPUT jack is sent to both the PICKUP and MI-
CROPHONE channels.
11.
PHASE
This toggle determines the phase of the mixed micro-
phone channel. When in the down (IN PHASE) position, the
microphone channel is in phase with the pickup channel. When
in the up position, the microphone channel is out of phase with
the pickup channel. Regardless of what mode the pedal is set
to, whatever signal is sent through the microphone channel is
effected by the PHASE toggle.
12.
PHANTOM
This toggle determines whether the in48V
Phantom Power is applied to the EXT MIC jack. This is for use
with any microphone that re48V Phantom power to
operate. When in the down position, PHANTOM is ON. When
in the up position, PHANTOM is OFF.
Note:
Many small form-factor condenser microphones require
external power that is lower than 48V. Please consult the doc-
umentation for any given microphone to determine the proper
power solution to safely use the microphone with industry stan-
dard +48V phantom power.
