background image

piezosystem jena 

 
 

 

                                                              COMPETENCE 

 

                                                                                      IN PRECISION 

17

 

piezosystem jena GmbH

 

Pruessingstrasse 27 • 07745 Jena • Germany 

Tel + 49 (0) 3641 66 88 

– 0 • Fax +49 (0) 3641 66 88 – 66 • e-mail: [email protected] • http://www.piezojena.com 

Caution! 

Shock forces may damage the built-in ceramic element. Please avoid such forces, and 
handle the units with care, otherwise the guarantee will be lost. 

5.  Safety Instruction 

 

Do  not  open  the  units!  There  are  no  user  serviceable  parts  inside  and 
opening or removing covers may expose you to dangerous shock hazards or 
other risks. Refer all servicing to qualified service personnel. 

 

Allow  adequate  ventilation  around  the  units  so  that  heat  can  properly 
dissipate. Do not block ventilated openings or place the units near a radiator, 
oven  or  other  heat  sources.  Do  not  put  anything  on  top  of  the  units  except 
those that are designed for that purpose (e.g. actuators). 

 

Do not spill any liquids into the cabinet or use the units near water. 

 

Do  not  insert  objects  of  any  kind  into  the  cabinet  slots,  as  they  may  touch 
dangerous voltage points, which can be harmful or fatal or may cause electric 
shock, fire or equipment failure. 

 

Do  not  place  any  heavy  objects  on  any  cables  (e.g.  power  cords,  sensor 
cables,  actuator  cables,  optical  cables).  Damage  may  cause  malfunction  or 
shock or fire! 

 

Do  not  place  the  units  on  a  sloping  or  unstable  cart,  stand  or  table  as  they 
may fall or not work accurately. 

 

Work  with  the  units  only  in  a  clean  and  dry  environment!  Only  specially 
prepared units (e.g. actuators) can work under other conditions! 

 

Please use only original parts from 

piezosystem jena

 

piezosystem  jena

  does  not  give  any  warranty  for  damages  or  malfunction 

caused  by  additional  parts  not  supplied  by 

piezosystem  jena

.  Additional 

cables  or  connectors  will  change  the  calibration  and  other  specified  data. 
This  can  change  the  specified  properties  of  the  units  and  cause  them  to 
malfunction. 

 

Piezoelements  are  sensitive  systems  capable  of  the  highest  positioning 
accuracy.  They  will  demonstrate  their  excellent  properties  only  if  they  are 
handled correctly!  Please mount  them  properly  only  at the special  mounting 
points. 

 

Immediately  unplug  your  unit  from  the  wall  outlet  and  refer  servicing  to  qualified 
service personnel under the following conditions: 

 

When the power supply cord or plug is damaged 

 

If liquid has been spilled or objects have fallen into the unit. 

 

If the unit has been exposed to rain or water. 

 

If the unit has been dropped or the housing is damaged. 

 

If the unit is not working properly.

Summary of Contents for 5V10 OEM

















Reviews: