piezosystem jena
COMPETENCE
IN PRECISION
18
piezosystem jena GmbH
Pruessingstrasse 27 • 07745 Jena • Germany
Tel + 49 (0) 3641 66 88
– 0 • Fax +49 (0) 3641 66 88 – 66 • e-mail: [email protected] • http://www.piezojena.com
6. Instructions for checking the function of the system /
quick start
When you open the package, please check to make sure all the necessary parts are
complete (see packing list) and nothing is damaged.
Check the electronics and the actuator for any visible damage:
The top and bottom plate of the actuator (if it does not have another shape)
should be parallel each to each other, without scratches.
If there is any damage to the system please contact our local representative
immediately!
If the packaging material is damaged please confirm this with the shipping
company.
Before you switch on the system, please check:
The main voltage supplied in your country is the same as installed for the
external power supply (not included in the shipment!).
The secondary voltage (DC) matches with the amplifier (+5V).
Connect the power cable.
Connect the piezo-element by using the LEMO connector.
Offset is accomplished by the external offset (e.g. a load)
Because of the fast motion of the actuator a noise, crack can be heard. This is normal
and not a malfunction.
