Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezosystem.com
40
7.2. technical data
7.2.1. suitable casing
dimensions 28 TE / 3HE
BxTxH [mm] standard
195 x 343 x 158 (incl. foot 8mm)
BxTxH [mm] small
164 x 272 x 140 (incl. foot 7mm)
dimensions 42 TE / 3HE
BxTxH [mm] standard
265 x 343 x 158 (incl. foot 8mm)
BxTxH [mm] small
235 x 272 x 140 (incl. foot 7mm)
dimensions 63 TE / 3HE
BxTxH [mm] standard
373 x 343 x 158 (incl. foot 8mm)
BxTxH [mm] small
342 x 272 x 140 (incl. foot 7mm)
dimensions 84 TE / 3HE
BxTxH [mm] standard
480 x 343 x 158 (incl. foot 8mm)
BxTxH [mm] small
448 x 272 x 140 (incl. foot 7mm)
BxTxH [mm] double high
480 x 343 x 290 (incl. foot 8mm)
BxTxH [mm] rack
483 x 272 x 133
table 1: technical data suitable casing
(1 TE = 5.08 mm; 3 HE = 129 mm)
7.2.2. main power supply
main voltage
115V / 60Hz
230V / 50Hz
ENT 40
fuse
2 AT
1 AT
current [A]
2
1
power ENT40 [W]
25
width
14 TE = 71mm
ENT 150
fuse
2 AT
1 AT
current [A]
2
1
power ENT150 [W]
50
width
14 TE = 71mm
ENT 400
fuse
Si1: 1 AT
Si6: 4 AT
Si1: 1 AT
Si6: 2 AT
current [A]
4
2
power ENT400 [W]
100
width
18 TE = 91mm
table 2: technical data main supply
The ENT module was specifically developed to operate the ENV modules of
piezosystem jena
. It is not recommended to be used it in combination with any
other electrical devices. Replace damaged fuses only with same values.
Don't hesitate to contact our staff, if you have any question.
