PX200 V2 Manual
3
Rev 1.1, Released, 15-01-2018
1
Introduction
The PX200 is a low-noise voltage amplifier designed to drive capacitive and other loads from DC to
hundreds of kHz. The output voltage range can be unipolar, bipolar, or asymmetric with a peak-to-peak
value of between 50V and 200V. Two amplifiers can be connected in bridge-mode to provide
±
200V or
+400V. The amplifier will deliver up to 4 Amps peak with a sinusoidal output, or up to 8 Amps peak for
pulse applications.
The PX200 is compact, lightweight, and can be powered from any mains supply. The output connectors
include LEMO 00, LEMO 0B, BNC (adaptor included), and plug-in screw terminals, so many commercially
available piezoelectric actuators can be directly connected. The PX200 is suited to a wide range of
applications including: electro-optics, ultrasonics, vibration control, nanopositioning, and piezoelectric
motors
2
Warnings / Notes
This device produces hazardous potentials and requires suitably qualified
personnel with an observer trained in first-aid training. Do not operate the
device when there are exposed conductors.
