PX200 V2 Manual
16
Rev 1.1, Released, 15-01-2018
14.1
HV Output Screw Terminals
The screw terminal output has contacts for the output voltage, output return, and the internal HV supply
rails. The Output- signal is connected to ground through a 0.1 Ohm resistor.
Stack actuators are connected as shown below.
Bender actuators can be driven with a single bias voltage, for example 200 V, or a bipolar bias voltage, for
example ±100 V. The ±100 V bipolar configuration is shown below.
HV+
Output-
HV-
+100V
-100V to +100V
-100V
