PIETRO FIORENTINI 30051 Operation And Maintenance Manual Download Page 63

Page: 63 / 98

GOVERNORS NOR

TH AMERICA

GOVERNORS NOR

TH AMERICA

LOW PRESSURE GAS REGULATOR

INSTALLATION

REV. A

Operation, maintenance and warning manual

7 - INSTALLATION

7.1 - INSTALLATION PRE-REQUISITES

7.1.1 - ENVIRONMENTAL CONDITIONS

For the safe use of the equipment, respecting the permitted environmental conditions, follow the data on

the plate applied and any accessories (refer to paragraph 2.8 "Identification plates applied").

The equipment should be installed away from the weather and direct sunlight.

The place of installation must be suitable for safe use of the equipment.
The installation area of the equipment must have lighting that guarantees the operator good visibility during the work
phases on the equipment.

7.1.2 - STORAGE LONGER THAN THE MAXIMUM ALLOWABLE DURATION

It is prohibited to install the equipment after storage longer than the maximum allowed (5 years).

After more than the maximum allowable storage period, the equipment must be scrapped.

Summary of Contents for 30051



































































































Search results

Summary of Contents for 30051

Reviews:

Brands by name

Popular brands

PIETRO FIORENTINI 30051, Operation And Maintenance Manual

Search results

Summary of Contents for 30051

Reviews:

Brands by name

Popular brands