25
Preparing The Resin
Resin Calculator
Use the resin calculator to determine how much resin will be needed to complete all necessary
coats. Refer to the chart below for recommended number of coats. To receive resin calculator, plea-
se send a request to [email protected].
•
A minimum of 4 coats need to be applied
when the pipe is going to be cleaned using
High Pressure Water Jetting .
•
Maximum Water Jetting Pressure is 2600 PSI
or 180 Bar.
•
A minimum of 3 coats need for abrasion resis-
tance.
STEP 1
Before you begin preparing the resin for application, verify the following:
(A)
The Mini Miller and Pump are ON.
(B)
The Speed of the Mini Miller is set to 950 to
1100 rpm (speed dial 2
-
3).
(C)
The Speed of the Pump is set to full speed.
(D)
The Pump
is set to rotate clockwise.
PIPE DIAMETER RECOMMENDED
DN32 / 1.
1
/
4
”
DN40 / 1.
1
/
2
”
DN50 / 2”
DN70 / 3”
DN100 / 4”
DN150 / 6”
DN200 / 8”
DN225 / 9”
DN300 /12”
2
2
2
3 to 4
3 to 4
4 to 5
5 to 6
6 to 7
8 to 9
